Coach guide
Running a session at the bar.
The bar stands behind the plate and measures every ball your hitters put in play. The iPad is how you pick who's hitting and see the numbers. This page covers a normal day, start to finish.
Turn it on
- Turn on the cage lights. The cameras need them.
- Press the button on the bar's power box. Give the bar a minute or two to wake up.
- On the iPad, open Settings › Wi-Fi and join CageVision. That's the bar's own network. It has no internet, and that's normal.
- Open the CageVision app. Once it has connected before, it opens straight to the bar's pages.
There's nothing to calibrate and nothing to switch at the start of a day. The bar is set up for your cage once, at install, and keeps that setup.
Right after a power-on, the board and the Session page can be slow for a few minutes while the bar warms up. Wait it out. Restarting doesn't help, because each restart starts the warm-up over.
Pick who's hitting
- Tap Session in the top bar.
- Under Who's hitting, tap everyone in this group. They line up under Today's lineup in that order.
- Tap ▶ PLAY. The board opens with the first hitter up.
A new hitter
Tap + new hitter. A name is all it needs. Level and bats help, and a parent email links the family's account to this hitter on its own (see Families). Use the hitter's real name so the family recognizes it.
A new group means a new ▶ PLAY. Each PLAY starts a fresh session for that group.
Read the board
About two seconds after contact, the hitter's numbers land on the board. The iPad gives a short buzz on every read and a double buzz on a new session best. There's no sound.
Made-up numbers for a made-up hitter, laid out the way the board shows them.
| On the board | What it means |
|---|---|
| Exit velocity | How fast the ball left the bat, in mph. A ~ in front means the bar had fewer looks at the ball than usual and the number is an estimate. NO READ means the bar saw the swing but couldn't measure the ball, so it shows nothing rather than a guess. |
| Launch | The angle the ball left the bat, in degrees. Above 0 is up, below 0 is into the ground. |
| Direction | Left or right of straightaway center field, in degrees. L is toward left field, R toward right field. |
| Carry | How far the ball would fly in still air before it lands, in feet. |
| Session best | The hitter's hardest ball today. |
| All-time PR | The hitter's hardest ball ever on this bar. Beat it and the board shows NEW PERSONAL RECORD. |
| Last five | The hitter's last five reads, newest first. |
| xBA · xSLG · xwOBA | Expected stats on contact: what balls hit this hard at this angle have produced against MLB defenses. They describe the contact, not this one result. |
| CHOPPER | A tag on a ground ball that bounced in front of the plate. Exit velocity is measured after the bounce, launch is traced back to contact, and carry shows a dash. |
The board menu
Tap the three lines in the corner of the board. CONTACT, SPRAY, ROUND and ZONE open charts for the current hitter. REVIEW opens the swing videos. END SESSION ends the group (see End of the day).
Mode, ball and bat: a MODE · BALL · BAT entry in the same menu. Modes are Batting Practice, Home Run Derby and Directional Challenge. Ball is baseball, softball or smash ball, and there's a choice of training bats. Softball and smash-ball swings keep their own bests and never count toward a baseball PR. A chip under the swing count always shows what's set, and everything resets to baseball, standard bat, batting practice when the group ends.
Showing it on a TV
AirPlay-mirror the iPad to an Apple TV, or open http://10.42.0.1:8811/tv in the browser of any TV that's on the CageVision network. The iPad stays awake while the board is open.
Switch hitters
The lineup runs across the top of the board. Tap the name of whoever is stepping in. The highlighted hitter gets every swing until you tap someone else, so switch before their first swing.
A swing landed on the wrong hitter? Open Players, pick the hitter it landed on, open the swing, tap move to… and choose the right hitter. Their numbers update on every page.
Tee and machine
There's no switch. The bar works out whether the ball came off a tee or a pitching machine on its own.
- After a couple of machine pitches, the bar treats the cage as a machine cage. It stays that way for 5 minutes after the last pitch.
- So run tee groups first and machine groups last. If a tee group has to follow the machine, turn the machine off and give it 5 minutes before the first swing.
Loose balls are fine
Balls lying around the cage don't bother the bar. It learns where they sit within a couple of minutes. There's no need to clear them between hitters.
Reads that weren't swings
Now and then the bar puts up numbers for a ball nobody hit: a kid tossing a ball back, a cleanup throw, a throw-back from the catcher. These are called ghost reads. Void them so they stay out of the hitter's bests.
Erase Last Swing
- Open the board menu and tap ERASE LAST SWING.
- Check the read it shows you (speed, time and hitter), then confirm.
- Changed your mind? Tap UNDO within 10 seconds.
Each tap erases the newest read that still counts in the current group, so two thrown balls in a row take two taps. An erased read leaves the hitter's bests, averages, PRs, the session card and any game score, and its video never uploads.
If one slips through
A family can flag it from their app as Not a real swing, and it lands in your swing reports (see below). Older reads can be voided on the Players page with move to… (nobody: void it).
End of the day
1. End the session
Board menu › END SESSION. The group's session closes and the iPad goes back to the Session page, ready for the next group. Each hitter's numbers from the day are on the Players page.
2. Upload
The bar has no internet, so the iPad carries the day's numbers and videos to the cloud. Families see nothing new until this happens.
- Tap Upload in the top bar.
- The first time only: under Facility Wi-Fi, tap SET, enter your facility's Wi-Fi name and password, and tap SAVE. The app remembers it.
- Tap SWITCH TO FACILITY WI-FI & UPLOAD. Leave the screen open until it says it's all caught up. Newest sessions go first.
- Tap BACK TO CAGEVISION to rejoin the bar.
Uploads also run on their own whenever the iPad is online with the app open. Nothing is lost if you skip a night, but families wait for it.
3. Power off
On the Session page, press and hold power off until it fills. You can also use the gear › Unit › SHUT DOWN BAR. Wait for the fan to stop, then switch off the power box. Always shut down from the app first, the same way you eject a USB drive before pulling it.
Families and link codes
Parents follow their kid's numbers and videos in the same CageVision app, signed in as a parent. There are two ways to connect a family to a hitter:
- Parent email. Put the parent's email on the hitter (+ new hitter, or edit the hitter later). When the parent signs in with that email, the hitter shows up on their account.
- Link code. On the Session page, each hitter shows a six-character link code. Tap it to copy it and send it to the family. They sign in to the app as a parent and enter the code.
Numbers are free for families. Video is the family plan, $10 a month per family, at cagevisionbaseball.com/family.
"This swing isn't me"
A parent or hitter can flag one swing from their app as Not me (someone else hit it) or Not a real swing. The swing drops out of their bests while you look, and you get a notification.
In the app
- Gear › Facility › Swing reports.
- Each report shows the hitter, the day, the speed and what the family said. Pick one:
- MOVE TO… gives the swing to the hitter who really hit it.
- REMOVE takes it off everyone's record.
- KEEP puts it back. The family was wrong.
- If the iPad isn't on the CageVision network, your answer is saved and waits under To apply on the bar. Tap APPLY ON THE BAR the next time you're at the cage.
By email
You'll also get an email titled Who hit this swing? with one button, Tell us who it was. It opens a page where you type the hitter's first and last name, or choose remove or keep. No sign-in. The link works once and expires after 14 days.
What not to do
- Don't move, lean on or adjust the bar, and never touch a camera. The numbers depend on exactly where the cameras point. Never turn a lens ring.
- Don't move the bar inside the net or cut the net to give it a better view. It's placed where it is on purpose.
- Don't pull the plug without shutting down from the app first.
- Don't try to fix the aim yourself.
If the bar gets bumped, or the board shows CAMERA MOVED, or every number suddenly looks wrong: stop relying on the numbers and email deo@cagevisionbaseball.com with what happened and roughly when. Keep hitting if you like. The videos still record.
Quick fixes
| You see | Do this |
|---|---|
| RECONNECTING | If it clears within a minute, do nothing. If not, check the iPad is still on the CageVision Wi-Fi (iPads like to jump back to another network) and bring it closer to the bar. |
| No CageVision network | Power-cycle the bar at the power box: switch it off, wait 30 seconds, then press its button and give the bar a few minutes. (This is the one time it's fine to cut power without the app: the iPad can't reach the bar.) |
| Slow pages after power-on | The bar is warming up. Give it about 5 minutes. |
| Tee swings get no numbers after the machine ran | The bar is still treating the cage as a machine cage. Machine off, wait 5 minutes. |
| No numbers for several balls in play | Check nobody is standing between the bar and the plate. If it keeps happening, email us with the time. |
| Board looks old after reconnecting | Close the board and open it again from the top bar. |
| A family can't see today's swings | Run Upload. The iPad has to reach the internet before families see anything. |
| CAMERA MOVED or CAMERA FAULT | Email us. See What not to do. |
Anything else: deo@cagevisionbaseball.com. Tell us what the board showed and roughly what time it was.